Saturday, June 30, 2007

The desired Sound Pressure Level (SPL) at a given distance

This calculator provides the required electrical power (power output from the amplifier) to produce a desired Sound Pressure Level (SPL) at a given distance, along with an amount of headroom to keep the amplifier(s) out of clip.
Example:

You are designing a system where the farthest listening position from the loudspeaker is 100 meters, and the desired Sound Pressure Level is 85 dB SPL The loudspeaker chosen for the job has a sensitivity rating of 95 dB. With the minimum recommended amplifier headroom of 3 dB, then you need to choose an amplifier that can supply at least 1,995 watts to the loudspeaker.
Equations used to calculate the data:
dBW = Lreq - Lsens + 20 * Log (D2/Dref) + HR
W = 10 to the power of (dBW / 10)
Where:

Lreq = required SPL at listener
Lsens = loudspeaker sensitivity (1W/1M)
D2 = loudspeaker-to-listener distance
Dref = reference distance
HR = desired amplifier headroom
dBW = ratio of power referenced to 1 watt
W = power required

Reference :

Amplifier Power Required by Copyright © 2002 - 2007 Crown Audio®, Inc.

No comments: